{"title":"Crazy Days of Summer","description":"","products":[{"product_id":"decal-warn-locking-hub","title":"WARN Locking Hub - Decal - FJ40 - FJ45 - BJ - 1958-1984","description":"FJ40, FJ45, BJ \u0026amp; HJ Series - This reproduction locking hub decal is exact in every detail to the original. Placement: Warn locking hubs were a dealer-installed option, so the exact location varies a bit, but in general, if you have window defrosters, the decal goes on the driver's door, forward of the door panel. If not, it goes on the dash, to the left of the headlight switch. NOTE* After installing this decal you are having trouble reading it, you obviously installed it upside-down. Set down your drink and order another one.","brand":"Cruiser Corps","offers":[{"title":"Default Title","offer_id":12736641400898,"sku":"537-111","price":5.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/8770\/4898\/products\/94544a70fd23c595052224df2772c245.jpg?v=1571719736"},{"product_id":"shift-plate-3-speed-vacuum","title":"Shift Plate 3 Speed Vacuum FJ40, FJ45 1961-1971","description":"Fits 1961 – 9\/1971 FJ40 - Screen printed aluminum replacement. This reproduction shift plate is exact in every detail to the original from Toyota. Make your glove box door stand out with a new shift plate! - Mounting hardware included.","brand":"Cruiser Corps","offers":[{"title":"Default Title","offer_id":12736643235906,"sku":"A143","price":16.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/8770\/4898\/products\/e228ea36f6245ec43a66356d4905120d.jpg?v=1571719736"},{"product_id":"shift-plate-3-speed-direct","title":"Shift Plate 3 Speed Direct FJ40, FJ45 1971-1973","description":"Fits 9\/1971 – 9\/1973 FJ40\/45 - Screen printed aluminum replacement. This reproduction shift plate is exact in every detail to the original from Toyota. Make your glove box door stand out with a new shift plate! - Mounting hardware included.","brand":"Cruiser Corps","offers":[{"title":"Default Title","offer_id":12736643563586,"sku":"A142","price":16.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/8770\/4898\/products\/d015d66182a71716757593cdfc595203.jpg?v=1571719736"},{"product_id":"shift-plate-4-speed","title":"Shift Plate 4 Speed FJ40, FJ45, BJ 1973-1984","description":"Fits 9\/1973 – 1984 FJ40\/45, BJ \u0026amp; HJ 40 Series - Screen printed aluminum replacement. This reproduction shift plate is exact in every detail to the original from Toyota. Make that glove box door stand out with a new shift plate! - Mounting hardware included.","brand":"Cruiser Corps","offers":[{"title":"Default Title","offer_id":12736646152258,"sku":"A144","price":16.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/8770\/4898\/products\/f2c562f6c395a5d3173c731e3ff6b2ac.jpg?v=1571719736"},{"product_id":"mirror-set-chrome","title":"Mirror Set - Chrome - FJ60, FJ62 1980-1990","description":"This chrome mirror set fits both the FJ60 as well as the FJ62 from 8\/1980 - 1\/1990. These reproduction mirrors have the same great looking style as the original mirrors from Toyota at a fraction of the cost. NOTE* Mirrors are manual and include mounting gaskets.","brand":"Cruiser Corps","offers":[{"title":"Pair","offer_id":14266859520066,"sku":"A112","price":159.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/8770\/4898\/products\/6eca4c9d6c5961c72967872b26829522.jpg?v=1571719739"},{"product_id":"paint-pewter-aerosol","title":"Paint - Pewter Aerosol - FJ40, FJ45, FJ55, BJ 1958-1984","description":"\u003cp\u003eThis pewter aerosol paint is matched off the original Toyota color, and is an exclusive to Cruiser Corps.\u003c\/p\u003e\n\u003cp\u003eToyota used this color to paint their bumpers, bumperettes, glove boxes, consoles, and dash clusters, as well as several other items.\u003c\/p\u003e\n\u003cp\u003eThis will allow you to spray those necessary parts on your restoration without mixing, measuring, or using a spray gun\/compressor. Also great for touching up annoying scratches.\u003c\/p\u003e\n\u003cp\u003e- One can\u003c\/p\u003e\n\u003cp\u003e- Enamel paint with high gloss finish\u003c\/p\u003e\n\u003cp\u003eNOTE* Paint can NOT be shipped by air or outside the U.S.\u003c\/p\u003e\n\u003cp\u003e*Tech Tip: It is impossible to exactly color match factory paint. Any number of variables such as air pressure, temperature, or humidity can change the tint of paint. Even comparing one batch to another will have color variances. It is best to have a professional apply the paint to blend the color variances. While these are based off the factory colors, you should not expect a 100% color match.\u003c\/p\u003e\n\u003cp\u003eNote: Before application, aerosol paint should be shaken vigorously, for at least 1 minute after the mixing ball inside begins to rattle. If the paint has been previously used, it may be necessary to clean the nozzle by dipping it in a small amount of lacquer thinner, and swirling it around, then wiping with a clean cloth. If the ambient temperature is below 90 degrees Fahrenheit, we have found it helpful to use a hair dryer or heat gun to warm the can prior to application. Before spraying the part, we recommend testing the spray pattern on a piece of scrap material, like cardboard, just to get a feel for how the nozzle will pattern the paint.\u003c\/p\u003e\n\u003cp\u003eFor best results, all parts to be painted should be prepped with primer and light scuffing from a scotch brite pad or 1500 grit sandpaper. The can should be held as close to vertical as possible while spraying, and held 12-14\" from the object being painted. It is better to spray several light coats with a 40-50% overlap, to let the paint build up gradually, rather than to try to get maximum coverage with one heavy coat. Allow the paint to dry 5-10 minutes between coats. If you notice the nozzle starts to splatter, you will need to clean it with lacquer thinner as mentioned above before proceeding. Occasionally, paint will build up on the nozzle, and dry between coats, causing paint splatter.\u003c\/p\u003e","brand":"Cruiser Corps","offers":[{"title":"Default Title","offer_id":12736664240194,"sku":"507-101","price":20.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/8770\/4898\/products\/IMG_0923.jpg?v=1668005733"},{"product_id":"paint-cygnus-white-aerosol","title":"Paint - Cygnus White (012) Aerosol - FJ40, FJ45, BJ 1958-1984","description":"\u003cp\u003eThis cygnus white (012) aerosol paint is matched off the original Toyota color, and is an exclusive to Cruiser Corps.\u003c\/p\u003e\n\u003cp\u003eToyota used this color to paint their fiberglass tops, headlight bezels, and white wheels. This will allow you to spray those necessary parts on your restoration without mixing, measuring, or using a spray gun\/compressor. Also great for touching up annoying scratches.\u003c\/p\u003e\n\u003cp\u003e- One can\u003c\/p\u003e\n\u003cp\u003e- Enamel paint with high gloss finish.\u003c\/p\u003e\n\u003cp\u003eNOTE* Paint can NOT be shipped by air or outside the U.S.\u003c\/p\u003e\n\u003cp\u003e*Tech Tip: It is impossible to exactly color match factory paint. Any number of variables such as air pressure, temperature, or humidity can change the tint of paint. Even comparing one batch to another will have color variances. It is best to have a professional apply the paint to blend the color variances. While these are based off the factory colors, you should not expect a 100% color match.\u003c\/p\u003e\n\u003cp\u003eNote: Before application, aerosol paint should be shaken vigorously, for at least 1 minute after the mixing ball inside begins to rattle. If the paint has been previously used, it may be necessary to clean the nozzle by dipping it in a small amount of lacquer thinner, and swirling it around, then wiping with a clean cloth. If the ambient temperature is below 90 degrees Fahrenheit, we have found it helpful to use a hair dryer or heat gun to warm the can prior to application. Before spraying the part, we recommend testing the spray pattern on a piece of scrap material, like cardboard, just to get a feel for how the nozzle will pattern the paint.\u003c\/p\u003e\n\u003cp\u003eFor best results, all parts to be painted should be prepped with primer and light scuffing from a scotch brite pad or 1500 grit sandpaper. The can should be held as close to vertical as possible while spraying, and held 12-14\" from the object being painted. It is better to spray several light coats with a 40-50% overlap, to let the paint build up gradually, rather than to try to get maximum coverage with one heavy coat. Allow the paint to dry 5-10 minutes between coats. If you notice the nozzle starts to splatter, you will need to clean it with lacquer thinner as mentioned above before proceeding. Occasionally, paint will build up on the nozzle, and dry between coats, causing paint splatter.\u003c\/p\u003e","brand":"Cruiser Corps","offers":[{"title":"Default Title","offer_id":12736666239042,"sku":"507-102","price":20.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/8770\/4898\/products\/IMG_0912.jpg?v=1668005826"},{"product_id":"paint-beige-464-aerosol","title":"Paint - Beige (464) - Aerosol - FJ40 - FJ45 - FJ60 -  BJ - 1976-1985","description":"\u003cp\u003eThis Beige (464) aerosol paint is matched off the original Toyota color, and is an exclusive to Cruiser Corps. FJ40, FJ45, FJ60 BJ '76-'85\u003c\/p\u003e\n\u003cp\u003eToyota used this color code 464 beige for many years for both the FJ40s and FJ60s. Without a doubt, this is one of the most desired and popular colors that Toyota ever had! This aerosol will allow you to spray those necessary parts on your restoration without mixing, measuring, or using a spray gun\/compressor.\u003c\/p\u003e\n\u003cp\u003eAlso great for touching up annoying scratches.\u003c\/p\u003e\n\u003cp\u003e- One can\u003c\/p\u003e\n\u003cp\u003e- Enamel paint with high gloss finish For Toyota Paint Code Reference, click on this link - \u003ca href=\"http:\/\/www.toyotareference.com\/landcruiser\/1961-1983\"\u003ehttp:\/\/www.toyotareference.com\/landcruiser\/1961-1983\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eNOTE* Paint can NOT be shipped by air or outside the U.S.\u003c\/p\u003e\n\u003cp\u003e*Tech Tip: It is impossible to exactly color match factory paint. Any number of variables such as air pressure, temperature, or humidity can change the tint of paint. Even comparing one batch to another will have color variances. It is best to have a professional apply the paint to blend the color variances. While these are based off the factory colors, you should not expect a 100% color match.\u003c\/p\u003e\n\u003cp\u003eNote: Before application, aerosol paint should be shaken vigorously, for at least 1 minute after the mixing ball inside begins to rattle. If the paint has been previously used, it may be necessary to clean the nozzle by dipping it in a small amount of lacquer thinner, and swirling it around, then wiping with a clean cloth. If the ambient temperature is below 90 degrees Fahrenheit, we have found it helpful to use a hair dryer or heat gun to warm the can prior to application. Before spraying the part, we recommend testing the spray pattern on a piece of scrap material, like cardboard, just to get a feel for how the nozzle will pattern the paint.\u003c\/p\u003e\n\u003cp\u003eFor best results, all parts to be painted should be prepped with primer and light scuffing from a scotch brite pad or 1500 grit sandpaper. The can should be held as close to vertical as possible while spraying, and held 12-14\" from the object being painted. It is better to spray several light coats with a 40-50% overlap, to let the paint build up gradually, rather than to try to get maximum coverage with one heavy coat. Allow the paint to dry 5-10 minutes between coats. If you notice the nozzle starts to splatter, you will need to clean it with lacquer thinner as mentioned above before proceeding. Occasionally, paint will build up on the nozzle, and dry between coats, causing paint splatter.\u003c\/p\u003e","brand":"Cruiser Corps","offers":[{"title":"Default Title","offer_id":12736667418690,"sku":"507-103","price":20.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/8770\/4898\/products\/IMG_0913.jpg?v=1668005849"},{"product_id":"bolt-kit-assorted-6mm-hardware-kit-450pcs","title":"A94 - Bolt Kit - Assorted 6mm Hardware Kit - 450PCS - FJ40 - FJ45 - FJ55 - FJ60 -  FJ62 - FJ Cruiser - BJ - 1958-2009","description":"No need to keep searching through your bolt bins to finds those bolts! Buy this kit and get it done! Stainless Steel Hardware Kit Includes: M6-1.0 x 10mm Cap Screw x50 M6-1.0 x 12mm Cap Screw x50 M6-1.0 x 16mm Cap Screw x50 M6-1.0 x 20mm Cap Screw x50 M6-1.0 x 25mm Cap Screw x50 M6 Split Lock Washer x75 M6 Flat Washer x75 M6-1.0 Flange Nut x50","brand":"Cruiser Corps","offers":[{"title":"Default Title","offer_id":12736667484226,"sku":"A94","price":42.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/8770\/4898\/products\/A94_2.jpg?v=1646671867"},{"product_id":"carburetor-rebuild-kit","title":"Carburetor - Rebuild Kit - FJ40 - FJ45 - FJ55 - FJ60 - 1975-1987","description":"Quality carburetor rebuild kit for your later model FJ40\/45, FJ55 \u0026amp; FJ60 - 1\/1975 - 7\/1987 Includes all necessary gaskets, diaphragm, and accelerator pump plunger for a full rebuild. *Note: You will want to thoroughly clean and reuse your original metering jets.","brand":"Cruiser Corps","offers":[{"title":"Default Title","offer_id":12736681902146,"sku":"551-110","price":56.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/8770\/4898\/products\/e1aefa3643048ac09beeca4f9e23131d.jpg?v=1571719741"},{"product_id":"fuel-pump","title":"Fuel Pump FJ40, FJ45, FJ55, FJ60 1979-1987","description":"Fuel Pump for 2F Motor with year range from 1\/1979 to 8\/1987. Fits FJ40\/45, FJ55, FJ60 - Starting in '79, some Cruisers came with fuel pump spacers, some didn't. We recommend purchasing a new spacer when replacing the fuel pump, provided yours came with one from the factory - You'll have to check to see if yours has a spacer or not. The original spacer can compress over time, which places the pump arm too far into the engine block. Search SKU: 551-150 for the spacer. You will also need 2 gaskets. SKU: 551-188.","brand":"Cruiser Corps","offers":[{"title":"Default Title","offer_id":12736699564098,"sku":"551-141","price":90.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/8770\/4898\/products\/30ca6e0190ae7d781abd497e3bfa6145.jpg?v=1571719743"},{"product_id":"fuel-filter-oem","title":"Fuel Filter - OEM - FJ40, FJ45, FJ55 1958-1970","description":"OEM Toyota - Fits FJ40, FJ45, \u0026amp; FJ55 1958 - 7\/70. *Tech Tip: If your Cruiser is having trouble running, the fuel filter is always a good place to start. They do clog up from rust in the tank coming through the system, or sitting for long periods of time can create a varnish that will clog fuel flow.","brand":"Toyota","offers":[{"title":"Default Title","offer_id":12736714047554,"sku":"525-240","price":13.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/8770\/4898\/products\/08cee52fe39e9937c038915238bf1f6e.jpg?v=1571719744"},{"product_id":"weatherstip-adhesive-and-activator","title":"Weatherstrip - Adhesive and Activator - FJ40, FJ45, FJ55, FJ60, FJ62, FJ80, FJ Cruiser, BJ 1958-2015","description":"Cruiser Corps has found this flexible adhesive to be the best\/ most affective adhesive on the market. Not only is it quick to use, it will allow you to install weatherstrips or emblems at a fraction of the time of other products. Dries within seconds of applying the activator. Glue and activator provides enough to install at least two door weatherstrips. FINALLY NO MORE MESSY GLUE! INSTALLATION TIPS: When installing weatherstrip, apply the glue directly to the weatherstrip, then spray the activator directly to the painted surface. (Activator will NOT damage paint regardless of how fresh it is, though the glue will, hence why it needs to be installed on the weatherstrip and not the paint.)","brand":"Cruiser Corps","offers":[{"title":"Default Title","offer_id":12736715030594,"sku":"A36","price":14.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/8770\/4898\/products\/6b6256b1ddf7b523c1f820ac86e70f48.jpg?v=1571719745"},{"product_id":"paint-sky-blue-854-aerosol","title":"Paint - Sky Blue (854) Aerosol - FJ40, FJ45, FJ55, BJ 1958-1987","description":"\u003cp\u003eThis Sky Blue aerosol paint is matched off the original Toyota color color, and is an exclusive to Cruiser Corps.\u003c\/p\u003e\n\u003cp\u003eToyota used this color on FJ40's from 1976 to 1980. This will allow you to spray those necessary parts on your restoration without mixing, measuring, or using a spray gun\/compressor. Also great for touching up annoying scratches.\u003c\/p\u003e\n\u003cp\u003e- One Can\u003c\/p\u003e\n\u003cp\u003e- Enamel paint with high gloss finish For Toyota Paint Code Reference, click on this link - \u003ca href=\"http:\/\/www.toyotareference.com\/landcruiser\/1961-1983\"\u003ehttp:\/\/www.toyotareference.com\/landcruiser\/1961-1983 \u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eNOTE* Paint can NOT be shipped by air or outside the U.S.\u003c\/p\u003e\n\u003cp\u003e*Tech Tip: It is impossible to exactly color match factory paint. Any number of variables such as air pressure, temperature, or humidity can change the tint of paint. Even comparing one batch to another will have color variances. It is best to have a professional apply the paint to blend the color variances. While these are based off the factory colors, you should not expect a 100% color match.\u003c\/p\u003e\n\u003cp\u003eNote: Before application, aerosol paint should be shaken vigorously, for at least 1 minute after the mixing ball inside begins to rattle. If the paint has been previously used, it may be necessary to clean the nozzle by dipping it in a small amount of lacquer thinner, and swirling it around, then wiping with a clean cloth. If the ambient temperature is below 90 degrees Fahrenheit, we have found it helpful to use a hair dryer or heat gun to warm the can prior to application. Before spraying the part, we recommend testing the spray pattern on a piece of scrap material, like cardboard, just to get a feel for how the nozzle will pattern the paint.\u003c\/p\u003e\n\u003cp\u003eFor best results, all parts to be painted should be prepped with primer and light scuffing from a scotch brite pad or 1500 grit sandpaper. The can should be held as close to vertical as possible while spraying, and held 12-14\" from the object being painted. It is better to spray several light coats with a 40-50% overlap, to let the paint build up gradually, rather than to try to get maximum coverage with one heavy coat. Allow the paint to dry 5-10 minutes between coats. If you notice the nozzle starts to splatter, you will need to clean it with lacquer thinner as mentioned above before proceeding. Occasionally, paint will build up on the nozzle, and dry between coats, causing paint splatter.\u003c\/p\u003e","brand":"Cruiser Corps","offers":[{"title":"Default Title","offer_id":12736727613506,"sku":"507-106","price":20.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/8770\/4898\/products\/IMG_0916.jpg?v=1668005934"},{"product_id":"paint-dune-beige-416-aerosol","title":"Paint - Dune Beige (416) Aerosol - FJ40, FJ45 1972-1975","description":"\u003cp\u003eThis Dune Beige (416) aerosol paint is matched off the original Toyota color, and is an exclusive to Cruiser Corps.\u003c\/p\u003e\n\u003cp\u003eToyota used this color on FJ40's from 1972 to 1975. This will allow you to spray those necessary parts on your restoration without mixing, measuring, or using a spray gun\/compressor. Also great for touching up annoying scratches.\u003c\/p\u003e\n\u003cp\u003e- One Can\u003c\/p\u003e\n\u003cp\u003e- Enamel paint with high gloss finish For Toyota Paint Code Reference, click on this link - \u003ca href=\"http:\/\/www.toyotareference.com\/landcruiser\/1961-1983\"\u003ehttp:\/\/www.toyotareference.com\/landcruiser\/1961-1983 \u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eNOTE* Paint can NOT be shipped by air or outside the U.S.\u003c\/p\u003e\n\u003cp\u003e*Tech Tip: It is impossible to exactly color match factory paint. Any number of variables such as air pressure, temperature, or humidity can change the tint of paint. Even comparing one batch to another will have color variances. It is best to have a professional apply the paint to blend the color variances. While these are based off the factory colors, you should not expect a 100% color match.\u003c\/p\u003e\n\u003cp\u003eNote: Before application, aerosol paint should be shaken vigorously, for at least 1 minute after the mixing ball inside begins to rattle. If the paint has been previously used, it may be necessary to clean the nozzle by dipping it in a small amount of lacquer thinner, and swirling it around, then wiping with a clean cloth. If the ambient temperature is below 90 degrees Fahrenheit, we have found it helpful to use a hair dryer or heat gun to warm the can prior to application. Before spraying the part, we recommend testing the spray pattern on a piece of scrap material, like cardboard, just to get a feel for how the nozzle will pattern the paint.\u003c\/p\u003e\n\u003cp\u003eFor best results, all parts to be painted should be prepped with primer and light scuffing from a scotch brite pad or 1500 grit sandpaper. The can should be held as close to vertical as possible while spraying, and held 12-14\" from the object being painted. It is better to spray several light coats with a 40-50% overlap, to let the paint build up gradually, rather than to try to get maximum coverage with one heavy coat. Allow the paint to dry 5-10 minutes between coats. If you notice the nozzle starts to splatter, you will need to clean it with lacquer thinner as mentioned above before proceeding. Occasionally, paint will build up on the nozzle, and dry between coats, causing paint splatter.\u003c\/p\u003e","brand":"Cruiser Corps","offers":[{"title":"Default Title","offer_id":12736728039490,"sku":"507-107","price":20.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/8770\/4898\/products\/IMG_0917.jpg?v=1668005956"},{"product_id":"weatherstrip-front-door-seal-left-reproduction-1","title":"Weatherstrip - Left Front Door Seal - Reproduction - FJ40, FJ45 \u0026 BJ Series 1975 – 1984","description":"Reproduction Toyota – Fits FJ40, FJ45 \u0026amp; BJ Series 1975 – 1984 Our reproduction weatherstrip not only has the same look, style and feel of the OEM, but comes at a fraction of the cost. Buy these as a pair and save $$$$!!!","brand":"Aftermarket","offers":[{"title":"Default Title","offer_id":12736730824770,"sku":"549-169","price":76.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/8770\/4898\/products\/9ecc3756ac9f5af2954b31b61615e936.jpg?v=1571719747"},{"product_id":"paint-toyota-gray-aerosol","title":"Paint - Toyota Gray (T450) Aerosol FJ40, FJ45, FJ55, FJ60, FJ62, BJ 1958-1987","description":"\u003cp\u003eToyota Gray, used on factory wheels, roll bars, etc.\u003c\/p\u003e\n\u003cp\u003e- One can\u003c\/p\u003e\n\u003cp\u003e- Enamel paint with high gloss finish\u003c\/p\u003e\n\u003cp\u003eNOTE* Paint can NOT be shipped by air or outside the U.S.\u003c\/p\u003e\n\u003cp\u003e*Tech Tip: It is impossible to exactly color match factory paint. Any number of variables such as air pressure, temperature, or humidity can change the tint of paint. Even comparing one batch to another will have color variances. It is best to have a professional apply the paint to blend the color variances. While these are based off the factory colors, you should not expect a 100% color match.\u003c\/p\u003e\n\u003cp\u003eNote: Before application, aerosol paint should be shaken vigorously, for at least 1 minute after the mixing ball inside begins to rattle. If the paint has been previously used, it may be necessary to clean the nozzle by dipping it in a small amount of lacquer thinner, and swirling it around, then wiping with a clean cloth. If the ambient temperature is below 90 degrees Fahrenheit, we have found it helpful to use a hair dryer or heat gun to warm the can prior to application. Before spraying the part, we recommend testing the spray pattern on a piece of scrap material, like cardboard, just to get a feel for how the nozzle will pattern the paint.\u003c\/p\u003e\n\u003cp\u003eFor best results, all parts to be painted should be prepped with primer and light scuffing from a scotch brite pad or 1500 grit sandpaper. The can should be held as close to vertical as possible while spraying, and held 12-14\" from the object being painted. It is better to spray several light coats with a 40-50% overlap, to let the paint build up gradually, rather than to try to get maximum coverage with one heavy coat. Allow the paint to dry 5-10 minutes between coats. If you notice the nozzle starts to splatter, you will need to clean it with lacquer thinner as mentioned above before proceeding. Occasionally, paint will build up on the nozzle, and dry between coats, causing paint splatter.\u003c\/p\u003e","brand":"Cruiser Corps","offers":[{"title":"Default Title","offer_id":12736738426946,"sku":"507-108","price":20.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/8770\/4898\/products\/IMG_0918.jpg?v=1668005995"},{"product_id":"fan-blade-fzj80","title":"Fan Blade - FZJ80 1992-1998","description":"Fits FZJ80 - 8\/1992 - 1\/1998 Matches OEM fan blade in size and fitment.","brand":"Cruiser Corps","offers":[{"title":"Default Title","offer_id":12736745865282,"sku":"546-101","price":56.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/8770\/4898\/products\/c3397cb85035e0cea541cb555b37edc5.jpg?v=1571719758"},{"product_id":"door-handle-outside-right-oem","title":"Right Door Handle \/ Outside - OEM - FJ40, FJ45, BJ 1975-1984","description":"OEM Toyota – Fits FJ40\/45, BJ \u0026amp; HJ Series 1975 – 1984","brand":"Toyota","offers":[{"title":"Default Title","offer_id":12736755761218,"sku":"525-177","price":119.41,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/8770\/4898\/products\/615b8afba8312b31b11e62b2930a250b.jpg?v=1571719759"},{"product_id":"paint-freeborn-red-aerosol","title":"Paint - Freeborn Red (T309) Aerosol - FJ40, FJ45, FJ55, FJ60, BJ \u0026 HJ 1958-8\/1987","description":"\u003cp\u003eThis Freeborn Red aerosol paint is matched off the original Toyota color, and is an exclusive to Cruiser Corps.\u003c\/p\u003e\n\u003cp\u003eThis will allow you to spray those necessary parts on your restoration without mixing, measuring, or using a spray gun\/compressor. Also great for touching up annoying scratches.\u003c\/p\u003e\n\u003cp\u003e- One can\u003c\/p\u003e\n\u003cp\u003e- Enamel paint with high gloss finish.\u003c\/p\u003e\n\u003cp\u003eNOTE* Paint can NOT be shipped by air or outside the U.S.\u003c\/p\u003e\n\u003cp\u003e*Tech Tip: It is impossible to exactly color match factory paint. Any number of variables such as air pressure, temperature, or humidity can change the tint of paint. Even comparing one batch to another will have color variances. It is best to have a professional apply the paint to blend the color variances. While these are based off the factory colors, you should not expect a 100% color match.\u003c\/p\u003e\n\u003cp\u003eNote: Before application, aerosol paint should be shaken vigorously, for at least 1 minute after the mixing ball inside begins to rattle. If the paint has been previously used, it may be necessary to clean the nozzle by dipping it in a small amount of lacquer thinner, and swirling it around, then wiping with a clean cloth. If the ambient temperature is below 90 degrees Fahrenheit, we have found it helpful to use a hair dryer or heat gun to warm the can prior to application. Before spraying the part, we recommend testing the spray pattern on a piece of scrap material, like cardboard, just to get a feel for how the nozzle will pattern the paint.\u003c\/p\u003e\n\u003cp\u003eFor best results, all parts to be painted should be prepped with primer and light scuffing from a scotch brite pad or 1500 grit sandpaper. The can should be held as close to vertical as possible while spraying, and held 12-14\" from the object being painted. It is better to spray several light coats with a 40-50% overlap, to let the paint build up gradually, rather than to try to get maximum coverage with one heavy coat. Allow the paint to dry 5-10 minutes between coats. If you notice the nozzle starts to splatter, you will need to clean it with lacquer thinner as mentioned above before proceeding. Occasionally, paint will build up on the nozzle, and dry between coats, causing paint splatter.\u003c\/p\u003e","brand":"Cruiser Corps","offers":[{"title":"Default Title","offer_id":12736756514882,"sku":"507-104","price":20.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/8770\/4898\/products\/IMG_0914.jpg?v=1668005873"},{"product_id":"paint-rustic-green-aerosol","title":"Paint - Rustic Green (T621) Aerosol - FJ40, FJ45, BJ 1958-1984","description":"\u003cp\u003eThis rustic green aerosol paint is matched off the original Toyota color, and is an exclusive to Cruiser Corps.\u003c\/p\u003e\n\u003cp\u003eThis will allow you to spray those necessary parts on your restoration without mixing, measuring, or using a spray gun\/compressor. Also great for touching up annoying scratches.\u003c\/p\u003e\n\u003cp\u003e- One Can\u003c\/p\u003e\n\u003cp\u003e- Enamel paint with high gloss finish For Toyota Paint Code Reference, click on this link - \u003ca href=\"http:\/\/www.toyotareference.com\/landcruiser\/1961-1983\"\u003ehttp:\/\/www.toyotareference.com\/landcruiser\/1961-1983 \u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eNOTE* Paint can NOT be shipped by air or outside the U.S.\u003c\/p\u003e\n\u003cp\u003e*Tech Tip: It is impossible to exactly color match factory paint. Any number of variables such as air pressure, temperature, or humidity can change the tint of paint. Even comparing one batch to another will have color variances. It is best to have a professional apply the paint to blend the color variances. While these are based off the factory colors, you should not expect a 100% color match.\u003c\/p\u003e\n\u003cp\u003eNote: Before application, aerosol paint should be shaken vigorously, for at least 1 minute after the mixing ball inside begins to rattle. If the paint has been previously used, it may be necessary to clean the nozzle by dipping it in a small amount of lacquer thinner, and swirling it around, then wiping with a clean cloth. If the ambient temperature is below 90 degrees Fahrenheit, we have found it helpful to use a hair dryer or heat gun to warm the can prior to application. Before spraying the part, we recommend testing the spray pattern on a piece of scrap material, like cardboard, just to get a feel for how the nozzle will pattern the paint.\u003c\/p\u003e\n\u003cp\u003eFor best results, all parts to be painted should be prepped with primer and light scuffing from a scotch brite pad or 1500 grit sandpaper. The can should be held as close to vertical as possible while spraying, and held 12-14\" from the object being painted. It is better to spray several light coats with a 40-50% overlap, to let the paint build up gradually, rather than to try to get maximum coverage with one heavy coat. Allow the paint to dry 5-10 minutes between coats. If you notice the nozzle starts to splatter, you will need to clean it with lacquer thinner as mentioned above before proceeding. Occasionally, paint will build up on the nozzle, and dry between coats, causing paint splatter.\u003c\/p\u003e","brand":"Cruiser Corps","offers":[{"title":"Default Title","offer_id":12736761004098,"sku":"507-105","price":20.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/8770\/4898\/products\/IMG_0915.jpg?v=1668005900"},{"product_id":"decal-coolant","title":"Coolant -Decal - FJ40 - FJ45 - FJ55 - FJ60 - FJ62 - BJ - 1958-1990","description":"Fits all Land Cruisers Placement: On top of the coolant overflow bottle. Details like new decals make every restoration pop! This is an exact reproduction of the original decal.","brand":"Cruiser Corps","offers":[{"title":"Default Title","offer_id":12736784597058,"sku":"537-101","price":2.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/8770\/4898\/products\/a89130101dab744a506cfd9fffd4bc0b.jpg?v=1571719761"},{"product_id":"decal-engine-oil-caution","title":"Engine Oil Caution - Decal - FJ40 - FJ45 - FJ55 - FJ60 - 1973-1982","description":"Fits FJ40, FJ45, FJ55, FJ60 3\/1973 - 10\/1982 Placement: Sits on valve cover. For F and 2F Engines. Details like new decals make every restoration pop! This is an exact reproduction of the original decal.","brand":"Cruiser Corps","offers":[{"title":"Default Title","offer_id":12736784728130,"sku":"537-102","price":2.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/8770\/4898\/products\/3f94a523396687ae9c568806832c3324.jpg?v=1571719761"},{"product_id":"decal-dashboard-headlight","title":"Dashboard - Headlight - Decal - FJ40 - FJ45 - BJ - 1980-1984","description":"Fits FJ40\/45, BJ \u0026amp; HJ Series - 8\/1980 - 10\/1984 Placement: Fits around the opening of the headlight switch. Describes the function of the rheostat dimmer for the gauge lights. Details like new decals make every restoration pop! This is an exact reproduction of the original decal.","brand":"Cruiser Corps","offers":[{"title":"Default Title","offer_id":12736784793666,"sku":"537-103","price":5.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/8770\/4898\/products\/6cda99fcf8f12fada1867b271ea57d6c.jpg?v=1571719761"},{"product_id":"decal-washer-bottle","title":"Washer Bottle - Decal - FJ40 - FJ45 - FJ55 - FJ60 - FJ62 - BJ - 1958-1990","description":"Fits all Land Cruisers. Placement: Top of washer reservoir. Details like new decals make every restoration pop! This is an exact reproduction of the original decal.","brand":"Cruiser Corps","offers":[{"title":"Default Title","offer_id":12736786333762,"sku":"537-104","price":2.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/8770\/4898\/products\/17713e007800acbe73be31f1c1b2408e.jpg?v=1571719761"},{"product_id":"decal-heater-control","title":"Heater Control - Decal - FJ40 - FJ45 - 1963-1967","description":"Fits FJ40, FJ45 1963-1967 Placement: Fits on the front of the heater blower. Details like new decals make every restoration pop! This is an exact reproduction of the original decal.","brand":"Cruiser Corps","offers":[{"title":"Default Title","offer_id":12736786661442,"sku":"537-105","price":6.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/8770\/4898\/products\/addfb555dd67611aaa4cc85bd1b7367c.jpg?v=1571719761"},{"product_id":"decal-engine-vacuum-hose","title":"Vacuum Hose -Decal -Engine - FJ40 - FJ45 - FJ55 - 1975-1976","description":"Fits FJ40 \u0026amp; FJ55 11\/1975 - 8\/1976 Placement: Installs on the top of the air intake. Details like new decals make every restoration pop! This is an exact reproduction of the original decal.","brand":"Cruiser Corps","offers":[{"title":"Default Title","offer_id":12736787873858,"sku":"537-106","price":5.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/8770\/4898\/products\/6e3b5068aece317a52846bb6e1b0aa56.jpg?v=1571719761"},{"product_id":"decal-arakawa-auto-body","title":"ARAKAWA Auto Body - Decal - FJ40 - FJ45 - BJ - 1958-1984","description":"Fits 40 Series Cruisers ARACO was previously Arakawa and the ARACO plant was where the first BJ was built in 1953. As of 2000, ARACO had built 3,200,000 Land Cruisers. ARACO was a separate company operating under contract to Toyota until being recently acquired by Toyota. (see thread on ih8mud.com) Placement: Passenger side kick panel wall.","brand":"Cruiser Corps","offers":[{"title":"Default Title","offer_id":12736788299842,"sku":"537-107","price":6.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/8770\/4898\/products\/d591e9807b256994cb2cadfac59cf42c.jpg?v=1571719761"},{"product_id":"decal-engine-evaporative-emission-control","title":"Engine Evaporative Emission Control - Decal -FJ40 - FJ45 - 1972-1978","description":"Fits FJ40 1972-1978 Placement: On emission control devices. Details like new decals make every restoration pop! This is an exact reproduction of the original decal.","brand":"Cruiser Corps","offers":[{"title":"Default Title","offer_id":12736788365378,"sku":"537-108","price":4.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/8770\/4898\/products\/deab20ff94a8c87b932cb17a7960de4a.jpg?v=1571719761"},{"product_id":"decal-engine-vsv-hose-diagram","title":"Engine VSV Hose Diagram -Decal - FJ40 - FJ45 - FJ55 - 1971-1975","description":"Fits FJ40, FJ45, \u0026amp; FJ55 9\/1971-1\/1975 Placement: On top of vacuum switching valve housing. Details like new decals make every restoration pop! This is an exact reproduction of the original decal.","brand":"Cruiser Corps","offers":[{"title":"Default Title","offer_id":12736788725826,"sku":"537-109","price":8.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/8770\/4898\/products\/d50c235ce5877cff40f3aef744e86e2b.jpg?v=1571719761"},{"product_id":"decal-engine-power-steering-reservoir-top","title":"Power Steering Reservoir Top -Decal -Engine - FJ40 - FJ45 - FJ55 - FJ60 - FJ62 - FJ80 - BJ - 1979-1998","description":"Fits all Land Cruisers with power steering: 1\/1979 - 1\/1998 Placement: Fits on the top of the power steering reservoir. Details like new decals make every restoration pop! This is an exact reproduction of the original decal.","brand":"Cruiser Corps","offers":[{"title":"Default Title","offer_id":12736788791362,"sku":"537-110","price":5.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/8770\/4898\/products\/90b08b3f16b70624435b0feaf8533d13.jpg?v=1571719761"},{"product_id":"paint-interior-aerosol-graphite-gray","title":"Paint \/ Interior Aerosol - Graphite Gray - FJ40, FJ45, FJ55, FJ60, FJ62, FJ80, FJ Cruiser, BJ 1958-2009","description":"Restore the inside of your Land Cruiser with the closest matching interior paints in the industry. SEM Color Coat is a flexible elastomeric coating that contains no dyes and is a permanent finish to help match existing interior pieces in your Cruiser. SEM Color Coat interior paints are formulated to change the color of your vinyls, leathers. plastics, carpet or velour without fading and all the while maintaining your material's texture, look and feel. This product will arrive in a 12oz. Aerosol can. Color - Graphite Gray","brand":"Cruiser Corps","offers":[{"title":"Default Title","offer_id":12736841056322,"sku":"577-101","price":25.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/8770\/4898\/products\/19e9e87c29c2773ce6c888a466162fc5.jpg?v=1571719766"},{"product_id":"paint-interior-aerosol-cordovan-brown","title":"Paint \/ Interior Aerosol - Cordovan Brown - FJ40, FJ45, FJ55, FJ60, FJ62, FJ Cruiser, BJ 1958-2009","description":"\u003cp\u003eRestore the inside of your Land Cruiser with the closest matching interior paints in the industry. SEM Color Coat is a flexible elastomeric coating that contains no dyes and is a permanent finish to help match existing interior pieces in your Cruiser.\u003c\/p\u003e\n\u003cp\u003eSEM Color Coat interior paints are formulated to change the color of your vinyls, leathers. plastics, carpet or velour without fading and all the while maintaining your material's texture, look and feel.\u003c\/p\u003e\n\u003cp\u003eThis product will arrive in a 12oz. Aerosol can.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Cruiser Corps","offers":[{"title":"Default Title","offer_id":12736842530882,"sku":"577-102","price":25.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/8770\/4898\/products\/d6b9f2a4e4095623934b0faf9b407587.jpg?v=1571719766"},{"product_id":"paint-interior-aerosol-satin-black","title":"Paint \/ Interior Aerosol - Satin Black - FJ40, FJ45, FJ55, FJ60, FJ62, FJ80 1958-2009","description":"Restore the inside of your Land Cruiser with the closest matching interior paints in the industry. SEM Color Coat is a flexible elastomeric coating that contains no dyes and is a permanent finish to help match existing interior pieces in your Cruiser. SEM Color Coat interior paints are formulated to change the color of your vinyls, leathers. plastics, carpet or velour without fading and all the while maintaining your material's texture, look and feel. This product will arrive in a 12oz. Aerosol can. Color - Satin Black","brand":"Cruiser Corps","offers":[{"title":"Default Title","offer_id":12736843022402,"sku":"577-103","price":25.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/8770\/4898\/products\/b20f842f4f7926f8c438289d4559f66e.jpg?v=1571719766"},{"product_id":"used-fj-40-ambulance-door-striker-smaller-7","title":"Used - Ambulance Door Striker \/ Guide - FJ40, FJ45, BJ 1963-1984","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eUsed OEM Toyota striker. Fits FJ \u0026amp; BJ 40 Series 01\/1975-10\/1984 for the rear ambulance doors. Fits the right rear ambulance door near the middle of the door jamb. This part acts to line up the door latch with the striker and to dampen vibration between the doors. It also fits 1963-12\/1974 FJ40\/45 front doors, driver or passenger. Sometimes the rubber sides have some minor cracks.  \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease confirm part application due to this being a non-returnable part.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e**Note: If this product is out of stock please contact us to check availability.**  \u003c\/strong\u003e\u003c\/p\u003e","brand":"Cruiser Corps","offers":[{"title":"Default Title","offer_id":12736986349634,"sku":"USED-103","price":36.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/8770\/4898\/files\/WhiteBackground3_8353b5f9-ea7f-45f6-8e2d-378e9c577923.heic?v=1713304000"},{"product_id":"used-air-bypass-valve","title":"Used - Air Bypass Valve - FJ40 \/ FJ45 1979-1980","description":"\u003cp\u003eUsed OEM Toyota air bypass valve.  Fair condition. Little surface rust but should be perfectly usable. Fits FJ40 and FJ45 1979-1980.\u003c\/p\u003e\n\u003cdiv class=\"product-1462543679554\"\u003e\n\u003cdiv data-rv-handle=\"used-fj60-grille\" class=\"product_section\n                js-product_section\n                container\n                is-justify-space-between\n                has-padding-bottom\"\u003e\n\u003cdiv class=\"product__information\n                  has-product-sticker\n                  one-half\n                  column\n                  medium-down--one-whole\"\u003e\n\u003cdiv class=\"description content bottom has-padding-top\"\u003e\n\u003cp\u003e\u003cstrong\u003ePlease confirm part application due to this being a non-returnable part.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e**Note: If this product is out of stock please contact us to check availability.**\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Cruiser Corps","offers":[{"title":"Default Title","offer_id":12737023148098,"sku":"Used-510","price":120.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/8770\/4898\/products\/2295f1771c69d08fe593af230a13db25.jpg?v=1571719770"},{"product_id":"fuel-pump-fj62","title":"Fuel Pump - FJ62 1987-1990","description":"New Fuel Pump. Fits FJ62 8\/1987 - 1\/1990 Comes with a strainer, and everything you need to install a brand new electric in-tank pump. - Mounts just like the factory one!","brand":"Cruiser Corps","offers":[{"title":"Default Title","offer_id":12737087045698,"sku":"551-175","price":127.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/8770\/4898\/products\/c55954623fc2ff75f29a2642a8e1d378.jpg?v=1571719770"},{"product_id":"used-rear-wiper-button-81-87","title":"USED Rear Wiper Button 1981-1987","description":"Hard to find rear wiper button for FJ60.","brand":"Cruiser Corps","offers":[{"title":"Default Title","offer_id":12737146814530,"sku":"u-2019","price":40.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/8770\/4898\/products\/9d5ca93e4b180f56ad64709d1a74e9a4.jpg?v=1571719772"},{"product_id":"smog-pump-v-belt-oem","title":"Smog Pump V Belt OEM - FJ40, FJ60 1980-1987","description":"\u003cp\u003eOEM Toyota - Fits FJ40, FJ60 - 8\/1980 - 8\/1987\u003c\/p\u003e\n\u003cp\u003eBelts this size and length are not commonly found on parts store shelves. Don't wait until you're stranded, and have to make do with what's available.\u003c\/p\u003e\n\u003cp\u003eReplace your cracked, worn out belt with the factory Toyota one, made for your Cruiser! -\u003c\/p\u003e\n\u003cp\u003eThis wide V-belt measures approximately 45\" around.\u003c\/p\u003e\n\u003cp\u003e- Fits around the crank pulley, water pump pulley, and smog pump (air pump) pulley. - Carry one as a spare in your emergency kit - Just in case!\u003c\/p\u003e","brand":"Toyota","offers":[{"title":"Default Title","offer_id":12737168408642,"sku":"525-642","price":24.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/8770\/4898\/products\/3bc43f52be2ed887e788ed279f9d95ac.jpg?v=1571719772"},{"product_id":"used-cowl-panel","title":"USED OEM Cowl Panel - FJ80 1991-1998","description":"\u003cp\u003ePanel is very straight and it is in good condition. OEM. \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e **Note: If this product is out of stock please contact us to check availability.**\u003c\/span\u003e\u003c\/p\u003e","brand":"Cruiser Corps","offers":[{"title":"Default Title","offer_id":12737182629954,"sku":"u-4033","price":132.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/8770\/4898\/products\/unnamed_32e97e6b-5a12-4d0d-b002-abb2afe24ae8.jpg?v=1645560149"},{"product_id":"used-driver-side-back-exterior-door-handle","title":"USED Driver Side Back Exterior Door Handle - FJ55 1968-1980","description":"This OEM handle is in good used condition","brand":"Cruiser Corps","offers":[{"title":"Default Title","offer_id":12737203404866,"sku":"u-4106","price":60.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/8770\/4898\/products\/aff53c793a4a0602e1612ebd82558e8f.jpg?v=1571719783"},{"product_id":"decal-cruiser-corps-logo","title":"Decal - Cruiser Corps Logo FJ40, FJ45, FJ55, FJ60, FJ62, FJ80, FJ Cruiser BJ 1958-2009","description":"Proudly display your Cruiser pride! The perfect addition to your rig. Dimensions: 4\" x 4\" White on clear die-cut decal.","brand":"Cruiser Corps","offers":[{"title":"Default Title","offer_id":12737215004738,"sku":"537-116","price":3.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/8770\/4898\/products\/2bf94a65880bd3584d5676492f140786.jpg?v=1571719784"},{"product_id":"used-fj55-passenger-front-window-w-run-channel","title":"Used - Front Window - Left or Right - FJ55 1977-1980","description":"\u003cp\u003eUsed OEM Toyota front door glass, works for left or right front doors. Great condition. Fits FJ55 5\/1977-7\/1980.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease confirm part application due to this being a non-returnable part.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e**Note: If this product is out of stock please contact us to check availability.**   \u003c\/strong\u003e\u003c\/p\u003e","brand":"Cruiser Corps","offers":[{"title":"Default Title","offer_id":12737221853250,"sku":"Used-2151","price":88.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/8770\/4898\/files\/WhiteBackground27.heic?v=1700599069"},{"product_id":"used-right-interior-door-panel","title":"Used - Interior Door Panel Right Front - LX450 1996-1997","description":"\u003cp\u003eUsed OEM Toyota passenger \/ right front side door panel. Good condition. A little discoloration to the fabric on the lower part as shown in photos. Fits LX450 1996-1997.  \u003c\/p\u003e\n\u003cp\u003e   \u003cstrong\u003ePlease confirm part application due to this being a non-returnable part. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e**Note: If this product is out of stock please contact us to check availability.** \u003c\/strong\u003e\u003c\/p\u003e","brand":"Cruiser Corps","offers":[{"title":"Default Title","offer_id":12737228177474,"sku":"Used-1539","price":220.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/8770\/4898\/files\/WhiteBackground164.jpg?v=1739895066"},{"product_id":"cruiser-corps-t-shirt-grey","title":"Cruiser Corps Shirt - Dark Grey - FJ40, FJ45, FJ55, FJ60, FJ62, FJ80, FJ Cruiser, BJ 1958-2009","description":"\u003cp\u003eHigh quality, Next Level Apparel T-Shirts 60% Cotton \/ 40% Polyester - Super soft! Show your Cruiser Corps pride!\u003c\/p\u003e","brand":"Cruiser Corps","offers":[{"title":"Small","offer_id":12737306984514,"sku":"539-102s","price":19.11,"currency_code":"USD","in_stock":true},{"title":"Medium","offer_id":12737307017282,"sku":"539-102m","price":19.11,"currency_code":"USD","in_stock":true},{"title":"XL","offer_id":12737307050050,"sku":"539-102xl","price":19.11,"currency_code":"USD","in_stock":true},{"title":"2XL","offer_id":12737307082818,"sku":"539-102xxl","price":20.61,"currency_code":"USD","in_stock":true},{"title":"Large","offer_id":12737307115586,"sku":"539-102l","price":19.11,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/8770\/4898\/products\/7e853cc3250b24790cbd00acabd42140.jpg?v=1571719784"},{"product_id":"used-fj60-instrument-cluster-face","title":"USED Instrument Cluster Face - FJ60 1981-1987","description":"USED FJ60 Instrument Cluster Face '80-'87","brand":"Cruiser Corps","offers":[{"title":"Default Title","offer_id":12737316782146,"sku":"u-2354","price":20.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/8770\/4898\/products\/08d2b640064e39104e3e224103f5c2b5.jpg?v=1571719785"},{"product_id":"used-rocker-arm-68-80","title":"USED Rocker Arm - FJ40, FJ45, FJ55 1969-1980","description":"USED Rocker Arm '68-'80. Sold individually.","brand":"Cruiser Corps","offers":[{"title":"Default Title","offer_id":12737345192002,"sku":"u-2384","price":16.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/8770\/4898\/products\/image_a4b1aad7-7c58-4712-b18b-87ae569e4ded.png?v=1600964762"},{"product_id":"used-engine-side-cover-plate-75-80","title":"Used -  2F Engine Side Cover Plate - FJ40 \/ FJ45 \/ FJ55 1975-1980","description":"\u003cp\u003eUsed OEM Toyota 2F engine side cover plate. Good condition! Fits FJ40, FJ45, and FJ55 from 1975-1980.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease confirm part application due to this being a non-returnable part.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e**Note: If this product is out of stock please contact us to check availability.**    \u003c\/strong\u003e\u003c\/p\u003e","brand":"Cruiser Corps","offers":[{"title":"Default Title","offer_id":12737351614530,"sku":"Used-1246","price":68.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/8770\/4898\/files\/WhiteBackground65.heic?v=1705004530"},{"product_id":"used-fj55-gauge-cluster-cover-68-80","title":"Used - Gauge Cluster Cover - FJ55 1968-1980","description":"\u003cp\u003eUsed OEM Toyota gauge cluster cover. Overall good condition with general wear and age. The vinyl is faded but there are not cracks or tears. Fits FJ55 1968-1980. Condition may vary slightly from photo. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease confirm part application due to this being a non-returnable part.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: If this product is out of stock please contact us to check availability.    \u003c\/strong\u003e\u003c\/p\u003e","brand":"Cruiser Corps","offers":[{"title":"Default Title","offer_id":12737352335426,"sku":"Used-1678","price":76.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/8770\/4898\/files\/WhiteBackground397.jpg?v=1752162619"},{"product_id":"used-4-speed-transmission-74-80","title":"Used - 4 Speed Transmission - FJ40, FJ60 1974-1987","description":"\u003cp\u003eUsed Toyota 4-speed transmission. Has not been serviced. This comes with just transmission. Transfer case, linkage and shifter not included. This was pulled from a 6\/1981 FJ60. Confirm this transmission will work for your vehicle. Freight shipping costs included in the price.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease confirm part application due to this being a non-returnable part.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e**Note: If this product is out of stock please contact us to check availability.** \u003c\/strong\u003e\u003c\/p\u003e","brand":"Cruiser Corps","offers":[{"title":"Default Title","offer_id":12737396670530,"sku":"Used-1249","price":1200.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0027\/8770\/4898\/files\/WhiteBackground87.heic?v=1705444026"}],"url":"https:\/\/cruisercorps.com\/collections\/crazy-days-of-summer.oembed?page=17","provider":"Cruiser Corps","version":"1.0","type":"link"}