Search

Fits FJ40, FJ45, FJ60, FJ62, BJ & HJ Series - 8/1980 - 1/1990 Aftermarket front wheel stud, built to OEM specifications. - Sold individually.

When it comes to your wheels, don’t take chances. These wheel studs are produced to strict engineering quality standards. This design provides assurance your wheels will be tight every time they are removed and installed. - Sold as a set...

Hardened Wheel Studs designed to fit Toyota Land Cruisers. Sold as singles Lug Stud - 1958 - 7/1980

When it comes to your wheels, don’t take chances. These wheel studs are produced to strict engineering quality standards. This design provides assurance your wheels will be tight every time they are removed and installed.

Fits Toyota Land Cruiser - FJ40, FJ45, FJ55, FJ60, FJ62 , 80 series & 70 series - 1958 - 1997 These bolt on wheel spacers are designed to give you a little more width for steering component clearance and a...

Fits Disc Brake Front Axle Land cruiser - 9/1975 - 12/1997 Kit includes a flat washer, 2 spindle nuts, and a star lock washer. 1 kit services 1 steering knuckle. 2 kits required per axle.

Fits US model 80 series 1/1990-12/1997. Non US with full float rear axle 40 series, FJ55, FJ60, BJ & HJ series, 1/1979-12/1987. This lock nut threads onto the end of the spindle. It is used to adjust and set wheel...

Fits US Model 80 Series 1/1990-12/1997. Fits Non-US with full float rear axle FJ40, FJ55, FJ60, BJ&HJ 1/1979-12/1997. This plate ensures the rear axle lock nut stays locked in place. Bolts go through the nut and thread into this plate....

Our lug nut set fits all Landcruisers 1958 - 1/1990. This set will not only bring new life to your current wheels, but are a great addition when doing any restoration. NOTE* Lug nut set includes 24 piece, acorn style...

Fits Toyota Land Cruisers, FJ40, FJ45, FJ55, FJ60, FJ62, FJ80, FZJ80, BJ & HJ Series - 1598 - 1997 If you're changing the water pump for fan clutch it's possible to have a stripped stud or two. No need to...

This wheel cylinder kit will allow you to replace all four wheel cylinders on your front axle FJ40, FJ45, FJ55, BJ & HJ series 9/1971 - 9/1975. Set of four. Fits positions 1, 2, 3 and 4. Please refer to...

Fits Toyota Land Cruiser - FJ80 & FZJ80 - 1/1990 - 1/1998 Kit contains all gaskets, hardware, and bearings for a full rebuild of steering knuckles. 1 kit services both knuckles.

Used OEM Toyota front right knuckle housing with all studs, nuts, and bottom plate. Great condition. Fits FJ40, FJ60, and FJ62 1979-1/1990.  Please confirm part application due to this being a non-returnable part. **Note: If this product is out of...

Fits FZJ80/Lexus LX450, 100 Series/Lexus LX470 - 8/1992 - 2007 - Kit fits vehicles with rear disc brakes. - Comes with all the springs and clips you'll need when replacing the parking brake shoes. - 1 Kit services the entire...

Left Front Inner Axle seal fits the 100 series and 200 series 100 Series, UZJ100, LX470 200 Series, URJ200, LX570 1998-2021

Right Front Inner Axle seal fits the 100 series and 200 series 100 Series, UZJ100, LX470 200 Series, URJ200, LX570 1998-2021

This wheel cylinder kit will allow you to replace all four wheel cylinders on your rear axle FJ40, FJ45, FJ55, BJ & HJ series 9/1971- 7/1980. Fits positions 5, 6, 7 and 8. Please refer to the diagram for positioning....

No need to keep searching through your bolt bins to finds those bolts! Buy this kit and get it done! Stainless Steel Hardware Kit Includes:M8-1.25 x 16mm Cap Screw x50M8-1.25 x 20mm Cap Screw x50M8-1.25 x 25mm Cap Screw x50M8-1.25...

Fits Toyota Land Cruiser - FJ40, FJ45, FJ55, FJ60, FJ62 - 9/1975 - 1/1990 Kit contains all gaskets, hardware, and bearings for a full rebuild of steering knuckles. 1 kit services both knuckles. 

OEM Toyota - Fits OEM steel wheels. 1958 - 1990 - Buy the set and SAVE $$$$!! Spruce up your FJ40, or go for the vintage look on your 60 series. These hubcaps, in combination with the OEM steel wheels,...

OEM Toyota – Fits FJ40, FJ45, FJ55, FJ60, FJ62, & BJ Series - 1958 – 1990 Hub Cap Retainer Clips from the factory. Bolt Pattern - 6 x 5.5" Rim size - 15" x 5.5" Backspace - 3.25" Color is...

Used OEM Toyota front axle spindle for drum brakes. Fits FJ40 and FJ55 1958-9/1975.  Please confirm part application due to this being a non-returnable part.  **Note: If this product is out of stock please contact us to check availability.**  

Fits FJ40, FJ45, FJ55 Drum Brake Front Axle - 1958 - 9/1975 This washer sits between the two wheel bearing preload adjustment nuts. The tabs are meant to be bent over at least one flat on each nut to ensure...

Fits Land Cruisers with factory rear brakes - 9/1973 - 1/1995. One kit does one wheel. - 2 required per vehicle. - If you're planning to go further into the axle to fix leaks, check out our knuckle seal kits as well.

Fits FJ80 - 8/1992 - 12/1997, 70 Series 1990 - 2000 This gasket seals the drive flange to the hub, and prevents dirt and moisture from entering the hub and damaging the wheel bearings. - Sold individually

Fits FJ80 - 1/1990 - 8/1992 This bushing is pressed into the backside of the spindle, and is made of soft brass to prevent damaging the outer axle shaft. - Sold individually.

Fits FJ80 - 1/1990 - 3/1993 This gasket seals the drive flange to the hub, and prevents dirt and moisture from entering the hub and damaging the wheel bearings. - Sold individually

Fits FJ40, FJ45, FJ55, FJ60, FJ62, BJ & HJ Series - 1968 - 1/1990 The birfield seal is the inner-most seal on the front steering knuckles. It seals against the axle shaft, and keeps gear oil from mixing with grease...

Fits 80 series, Lexus LX450, 70 series, BJ & HJ Series - 1/1990 - 12/1997 The spindle bolts to the steering knuckle, and is what actually supports the hub/wheel assembly. This fits Land Cruisers with a factory disc brake front...

Rear wheel bearing kit fits semi float axles 1958 - 8/1973. One kit does one wheel. - 2 required per vehicle.           

OEM style new replacement rear lift gate support struts for Toyota Land Cruiser FJ80 1991-1997 Sold as a pair.

No need to keep searching through your bolt bins to finds those bolts! Buy this kit and get it done! Stainless Steel Hardware Kit Includes: M6-1.0 x 10mm Cap Screw x50 M6-1.0 x 12mm Cap Screw x50 M6-1.0 x 16mm...

OEM Toyota – Fits Steel Wheels 1958 – 1990 - These caps are sold in a set of (4) also available individually if needed. NOTE* Comes with two open caps which fit the front wheels, and two closed caps which...

Fits Toyota Land Cruiser ( Left Hand Drive ) - FJ40, FJ45  - 1963 – 1984  40/41/42/43/44/45/46/47 Series Left hand drive vehicles only. High quality Japanese kit of extreme durability. If your Cruiser is all over the road, it is...

Fits 9/1972 - 1984 FJ40/45, BJ & HJ Series Heavy duty part steering coupler made to meet or exceed OEM. Take out a lot of the slop that you feel in your steering wheel by simply replacing this little guy....

Rebuilding your brakes? It's probably time to replace the springs and pins while your at it. These are essential in any brake rebuild and cheap insurance. This kit completes one axle (Two Drums) Works for front or rear drums on...

Fits 70 series, BJ, HJ & FJ 1/1990 - 7/1999 Axle length is 415mm w/ 35mm sealing area.

Fits FZJ80 Land Cruiser - With ABS - 1/1995 - 12/1997 The brake master cylinder is a device that transforms mechanical force into hydraulic pressure. As the driver presses the brake pedal, the pedal lever applies force to the brake...

Fits 1958 - 7/80 40 series Toyota Land Cruisers • 12 Urethane Bushings in a box. • Performance in all temperatures • Components do not rot or deteriorate from exposue to oils, undercar chemicals or atmostpheric conditions such as smog...

Fits Toyota Land Cruiser - FJ60, FJ62, BJ60, BJ61, HJ60, & HJ61 - 8/1980 - 1/1990 If your Cruiser is all over the road, it is most likely time to replace your tie rod ends. - Left hand drive vehicles...

Fits 70 series, BJ, HJ & FJ - 8/1999 - 1/2007 Front left inner axle shaft. - Sold individually

Fits 70 series, BJ, HJ & FJ 1/1990 - 7/1999 Axle length is 770mm w/ 35mm sealing area.

OEM style new replacement rear lift gate support struts for Toyota Land Cruiser 60 series Sold as a pair.

Fits FJ40, FJ45, FJ55, FJ60, FJ62, BJ & HJ Series - 9/1975 - 1/1990 Toyota Land Cruiser Includes pin and springs for both calipers on the front axle. - These are not included with most brake pad sets.

OEM style new replacement hood support struts for Toyota Land Cruiser FJ80 1991-1997 Sold as a pair.

Product Features - Draw Tapered & Diamond Cut Leaves: Ensure the load is progressively distributed over a larger surface area, reducing the high stresses that develop at leaf ends. This provides increased ride quality and protection against leaf breakage, significantly...

**Due to Backordered Stock please allow 6 - 8 Weeks for delivery** Fits: FJ60/62, FJ80 - 8/1980 - 12/1997 Designed to reduce the effect of wheel vibration and improve the feel, handling and control of the vehicle, OME's steering stabilizers...

Fits FJ40/45 Toyota Land Cruisers 8/1980 - 10/1984 and FJ60, FJ62 Toyota Land Cruisers 8/1980 - 1/1990. • Performance in all temperatures • Components do not rot or deteriorate from exposue to oils, undercar chemicals or atmostpheric conditions such as...